Penwell AI
All posts
October 29, 2026 · 4 min read · The Penwell AI desk

How to balance a chemical equation by counting atoms

A method that works every time, a worked example with propane, and a free balancer that shows the atom count on both sides.

Balancing equations feels like guessing because most people start by changing numbers until something sticks. It's a counting exercise with one rule: you can change the coefficients in front of a formula, never the small numbers inside it. Turning H₂O into H₂O₂ gives you a different substance.

The method

  1. Write each element down with its count on the left and on the right.
  2. Start with an element that appears in only one compound on each side.
  3. Leave oxygen and hydrogen for last, and leave any element that sits alone as a pure element (O₂, H₂) until the very end, because a coefficient on it disturbs nothing else.
  4. Recount after every change.
  5. If you end with a half, multiply the whole equation through to clear it.

A worked example: propane

Unbalanced: C₃H₈ + O₂ → CO₂ + H₂O

Carbon appears once on each side, so begin there. Three carbons on the left means three CO₂ on the right.

Hydrogen is next. Eight on the left means four H₂O on the right, since each has two.

Now count oxygen on the right: 3 × 2 from the carbon dioxide plus 4 × 1 from the water makes 10. O₂ comes in pairs, so the left needs five O₂.

C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O

Check it. Carbon 3 and 3, hydrogen 8 and 8, oxygen 10 and 10.

Where people get stuck

If the oxygen count forces a half, say 3.5 O₂, double the whole equation. If one element sits in three compounds on the same side, balance the others first and let that one fall out last. Both cases still follow the method; they just need an extra pass.

The balancer

The equation balancer takes an unbalanced equation such as Fe + O2 -> Fe2O3 and returns the balanced form, 4 Fe + 3 O₂ → 2 Fe₂O₃, with a table of atoms on each side. It's free and needs no account.

It doesn't use AI. It solves the atom-count equations directly, so you get the same answer every time, and when an equation can't be balanced, or has more than one valid answer, it says so rather than inventing one. Brackets work, as in Ca(OH)2, and so do hydrates such as CuSO4.5H2O.

Try this one by hand first, then check it: Al2(SO4)3 + Ca(OH)2 -> Al(OH)3 + CaSO4. The answer is Al₂(SO₄)₃ + 3 Ca(OH)₂ → 2 Al(OH)₃ + 3 CaSO₄.

The limit

Write the equation without state symbols like (g) or (aq). It doesn't handle ionic charges or redox half-reactions yet. For a numerical that uses the balanced equation, such as moles or limiting reagents, the step-by-step solver explains each conversion.

Try it on your own notes

5 free packs a month. No card needed.

Open the equation balancer